eta-usa tel : 408-778-2793 fax : 408-779-2753 e-mail : sales@eta-usa.com the sv-series has been developed to follow eta?s philosophy of ?miniaturizatio n and high efficiency? of power supplies. there are two inputs available: svm..-sa is designed for 100vac; svm-..sb is usable with 200vac. the small size and high efficiency are suitable for many applications, especially small equipment. application features industrial input 1. very small (one of the smallest in japan) 2. no derating when mounted on a horizontal surface 3. low impedance capacitors 4. over voltage protection 5. emi: complies with fcc/a options input voltage: efficiency: ac85-132v 77% 15 watt ac-dc converter svm-sb single channel
eta-usa tel : 408-778-2793 fax : 408-779-2753 e-mail : sales@eta-usa.com specifications svm**sb 15watts/single input voltage input range input frequency input frequency range phase inrush current *1 efficiency [%] (typical) *2 78 79 80 82 83 47-440hz single 12a(maximum)at ac200v input characteristic ac200v ac170-264v(dc220-350v) 50/60hz model svm05sb SVM12SB svm15sb svm24sb svm48sb derating curve efficiency curve
eta-usa tel : 408-778-2793 fax : 408-779-2753 e-mail : sales@eta-usa.com specifications svm**sb 15w atts/single output voltage [v] 5 12 15 24 48 output current [a] 3.0 1.3 1.0 0.7 0.35 voltage adjust range ripple and noise [mvp-p](maximum) *3 150 220 250 340 580 regulation a.statistic line regulation [mv](maximum) 40 96 120 192 384 b.statistic load regulation [mv](maximum) 45 108 135 216 432 c.tem perature coefficient *4 d.drift[mv](maximum) *5 40 75 90 135 255 e.dynamic load regulation [mv](typical) *6 150 360 450 720 1440 f.recovery tim e *6 rise up time hold up tim e 3.30 1.43 1.10 0.77 0.38 5.50 13.2 16.50 26.4 52.8 rem ote sense rem ote on/off operating temperature operating humidity storage temperature storage humidity vibration shock cooling leakage current safety w eight (typical) mtbf [h] switching frequency[khz](typical) *4 at 0 to +50 *5 for 7hour period after 1hour warm-up at 25 and rated input/output *6 when output current changed from 25% to 75% of rated output current rapidly at ac200v input conditions: *1 at cold start *2 at dc260v input and rated output *3 measured by a bayonet probe at output connector at 0 to 100mhz bandwidth model svm05sb SVM12SB svm15sb svm24sb svm48sb +/- 10% of rated output voltage(at no load within the input range) 0.03%/ 0.3ms(typical) 500ms(maximum) at 25 and rated input/output 15ms(minimum) at 25 and rated input/output functions overcurrent protection R 110% of rated output current[a] current limiting with automatic recovery overvoltage protection R 110% of rated output voltage[v] output shutdown(to reset,leave 1minute after shut-off) not available not available environmental 0 to +50 85%rh(non-condensing) -20 to +85 85%rh(non-condensing) w ithstanding voltage primary-secondary ac2,500v for 1minute primary-frame ground ac2,500v for 1minute secondary-frame ground ac500v for 1minute isolation resistance primary-secondary-frame ground 50m ? (minimum) by dc500v insulation tester 5-10hz:10m m double am plitude,10-55hz:19.6m /s 2 ,20minutes' period for 60minutes each along x,y,z axes(non-operating) 120g 600,000 140 294m/s 2 convection 1ma(maximum) at 25 ,rated input/output and rated input frequency
eta-usa tel : 408-778-2793 fax : 408-779-2753 e-mail : sales@eta-usa.com dimension diagram ocp curve
|
